Current time: 06-18-2019, 05:29 AM Hello There, Guest! (LoginRegister)
Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
flashing mr-tab tablet
01-30-2015, 11:25 AM
Post: #11
RE: flashing mr-tab tablet
1. Insert the USB cable in PC to detect the Hardware
2. In order to manually install the driver through Device Manager through Livesuit Driver Folder (/livesuit/USB driver) and check for the yellow exclamation mark (it should not be there)
.3. Run the LiveSuit.exe and follow the steps as instructed
4. Select the Image and before flash, you will have to disconnect the Tablet and repeat the step 1 above once more.
5. Once the LiveSuit detected by your Tablet, it will automatically start flashing the new firmware.

Livesuit will Disappear and you have to wait for 5 minutes.
After it, message will be displayed that its completed.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-30-2015, 11:31 AM (This post was last modified: 01-30-2015 11:33 AM by ankur pratap.)
Post: #12
RE: flashing mr-tab tablet
If the above method not works then use this Livesuit it will install the driver of their own
Visit this user's website Find all posts by this user
Quote this message in a reply
02-02-2015, 09:26 PM
Post: #13
RE: flashing mr-tab tablet
hi, mr ankur pratap

I have tried manually to install driver from both livesuit 1.11 and 1.07 with no success

it says driver unknown

there is a known driver installed : "Actions USB 2.0 (HS) WinUSB Device" from actionpadtool

but also with this driver both livesuit programs can not flash the tablet

any other suggestions??

thanks
Find all posts by this user
Quote this message in a reply
04-18-2015, 12:45 AM
Post: #14
RE: flashing mr-tab tablet
Hi buddy can you resolve it?? I have the same tablet with a
pattern lock and I can't flash it.
Find all posts by this user
Quote this message in a reply
04-20-2015, 10:21 AM (This post was last modified: 04-20-2015 10:23 AM by ankur pratap.)
Post: #15
RE: flashing mr-tab tablet
You should install the driver again and check in Device manager whether it has been recognized or not, if it is not recognized then none of the method will work. Check the steps to install Driver
You should use another USB as in most of the case other USB works
Visit this user's website Find all posts by this user
Quote this message in a reply
06-20-2015, 11:54 PM
Post: #16
RE: flashing mr-tab tablet
Hi, mr ankur pratap, i managed to install the adb-driver.
after that i try to flash with livesuit with no succes.
also android multytools does not work
i included some pics
can you assyst me further?

thanks

           
Find all posts by this user
Quote this message in a reply
06-22-2015, 10:22 AM (This post was last modified: 06-22-2015 10:23 AM by ankur pratap.)
Post: #17
RE: flashing mr-tab tablet
Check steps to install driver
Visit this user's website Find all posts by this user
Quote this message in a reply
06-22-2015, 08:38 PM
Post: #18
RE: flashing mr-tab tablet
mr. pratap, I have already installed the driver,
(post # 16) look at the pic (device manager),
now I need help to flash the tablet,
look at the rest of the pics in post # 16
Find all posts by this user
Quote this message in a reply
06-23-2015, 11:18 AM (This post was last modified: 06-23-2015 11:18 AM by ankur pratap.)
Post: #19
RE: flashing mr-tab tablet
Try phoenix usb pro
Visit this user's website Find all posts by this user
Quote this message in a reply
06-24-2015, 08:35 AM
Post: #20
RE: flashing mr-tab tablet
hi, mr pratap, i tried the phoenixusbpro.
i can't find the keyfile
the program is starting but nothing happens when i connect the tablet
remember, there is no volume key on the tablet
here are some pics


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)